Caterham Seven User Manual Page 128

  • Download
  • Add to my manuals
  • Print
  • Page
    / 227
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 127
Page | 127
connections face towards the engine.
Secure the upper mounting using nuts,
plain washers and spring washers.
Align the oil cooler bracket bottom
mounting hole to the bottom rubber
radiator mounting and the Secure using
nuts, plain washers and spring washers
(do not tighten) refer the Figure 109.
Align the oil cooler bracket against
radiator bracket and mark the other hole
on the oil cooler bracket. Drill the 8 mm
hole, refer the Figure109. Fit the oil cooler
bracket using fixings provided in z pack.
Figure 108: Radiator arrangement
1. Blanking plug
5. Oil cooler hose
2. Radiator bracket
6. Oil cooler hose
3. Oil cooler bracket
7. Radiator
4. Oil cooler
8. Radiator mount
Fit the oil cooler to the bracket using
fixings provided in z pack refer figure. 110.
The oil cooler and dry sump hoses need
to be fitted as shown in the schematic.
Figure 109: Routing of the oil pipes
The bottom of the oil tank connects
to the rear of the sump
The RHS of the oil cooler connects
to the front of the sump
The LHS of the oil cooler connects
to the top of the oil tank. The hose
should run along the bottom of the
radiator
The radiator mounting arrangement on SV
models differs considerably from that
shown. SV kits include LH and RH
radiator mounting plates, refer to Figure
111; these plates must be fixed to the
body before attaching the rubber
mountings and the radiator/inner cowl.
Page view 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 226 227

Comments to this Manuals

No comments