Caterham Seven User Manual download pdf (Page 173)

Page | 172

Do not over tighten. Replace the bulbs

and lens cover ensuring correct

orientation of the lens cover (indicator to

the outside).

Connect the econoseal plug to the

corresponding socket protruding from a

hole inside the rear wing. Ensure that the

plugs are correctly mated and push the

plug inside the rear side panel. Fit the

grommet to the hole in the body side

panel.

For reference the rear electrical

connections are detailed in Table 25.

Table 25: Rear lighting wiring

connections

Function

Wiring loom

colour

Light unit

wire colour

Rear light

Red/white

Red

Brake

Green/mauve

Green

Left indicator

Green/red

Green

Right

indicator

Green/white

Green

Earth

Black

Black

Secure the wiring inside the body using

cable ties.

12.5) Reversing light and fog light

The reversing light and the fog light are

fixed to the rear panel and the wiring

connections have been made at the

factory.

12.6) Rear number plate light

Remove and retain the cross-point screw

retaining the light cover and lens; remove

and retain the cover and lens. Remove

and retain the two nuts and spring

washers from the metal baseplate.

Pass the wire from the chassis loom

through the RH upper hole of the light

bracket on the chassis and through the

back of baseplate. Fit the baseplate to the

bracket and secure with the nuts and

spring washers. Ensure that the baseplate

studs earth to the bracket through the nuts

(remove paint from the bracket as

necessary).

NOTE

Cars that are not supplied with a spare

wheel bracket will be pre-fitted with a

number plate light bracket located below

the lower chassis tubes.

Remove and discard the two brass bullet

connectors supplied in the light. Shorten

the wire to a convenient length, strip back

sufficient insulation and attach (crimp) a

male bullet connector. Insert the bullet

connector into the central terminal on the

light. Replace the lens, cover and cross-

point screw.

12.7) Testing

Reconnect the battery negative lead.

Check all the lights for correct operation.

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 226 227

Comments to this Manuals

No comments