Caterham Seven User Manual download pdf (Page 175)

Page | 174

13.0) Weather equipment

This section explains how to perform the

initial fitment of the weather equipment,

the tool identified in Table 26 will be

required. However, if the specification for

your car included hood fitment then

instructions on how to refit, remove and

fold for storage can be found in your

Owner's Handbook.

Table 26: Additional tools required for

weather equipment

Item

Description

Durable Dot fastening

tool

Part No. 76068

(supplied in fastener

pack ZBC02)

Correctly fitted weather equipment is

shown in Figure 158.

Figure 157: Weather equipment

13.1) Fitting of hoodsticks and

hoodstraps

NOTE

Whichever option of roll over protection

has been specified must be fitted before

the hoodsticks.

Remove the inner hoodstick from the

hoodstick assembly and feed the end loop

of hoodstraps over the front hoodstick and

loop in the centre of the hoodstraps over

the rear hoodstick ensuring that the

adjusting buckle faces downwards when

the hoodsticks are erect, refer to Figure

159.

Reassemble the hoodstick assembly and

attach to the triangular brackets on the

chassis using the fixings provided.

Ensure that one plain washer is fitted

under the head of the screw and the other

between the fixing bracket and the

hoodstick.

Before fitting the hood you must first

secure the rearward part of the hoodstick

in the correct position. Measure distance

A from the top surface of the rear chassis

tube to the centre of the rear hoodstick to

obtain the correct positioning (standard

chassis 395 mm or

SV 420 mm), refer to Figure 159.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 226 227

Comments to this Manuals

No comments